One of those tasks that has been haunting me for several years now: installing the aftermarket fiberglass- parcel shelf. And it's been even longer since it was beautifully covered by the late Lambert Craenen, a local old school car upholsterer.
So I'd decided to tackle this job during my current holiday and install it. So, full of good spirits, I headed to the shed last Monday! But after a few frustrating hours, I had to admit my defeat and throw in the towel. The fit of the parcel shelf was so poor that I couldn't install it on my own: While trying to align the front of the parcel shelf with the mounting holes, it went wrong. I had to stretch the shelf so much that it put too much strain on the four screws securing it to the rear to the body underneath the rear window. The result was that all four screws including the plastic distance pieces, were pulled cleanly out of their respective mounting holes. Time to call in the help of a good friend and come up with a solution to fit the shelf.
In the end I decided to tackle the problem with long flat Allen headed M5 bolts together with longer distance pieces for the rear mount. The lower front edge was fitted using the original mounting method. It was still a struggle to get everything in place but we manged it in the end. And it was well worth it, as the pictures in this post prove. Special thanks go to Jos for assisting me today!
2 comments:
Theo. Fabien wilde de vertaling van de naam die je aan de coupé hebt gegeven, het kreng, niet publiceren. Dat betekent in het Frans “trut”. Ik vind het grappig en ironisch. Misschien kun je hem uitleggen waarom je deze naam hebt gekozen.
Met vriendelijke groeten,
Marc Spyker
Hoi Marc,
Die naam heeft ze helemaal zelf verdient tijdens haar restauratie in de 90-er jaren van de vorige eeuw. Op een dag was ik, bij een helaas veel te vroeg overleden vriend René, bezig met het opbouwen, na het spuiten van de carrosserie. En die dag zat alles nogal tegen. Dus er werd nogal wat gefoeterd en gescholden. En dat had René ook gehoord toen hij thuis kwam van het werk. En niet veel later hoorde ik René de werkplaats binnen komen, een klapstoeltje uitvouwen en een flesje bier open maken. Waarna er een grote hamer naar mij onder de auto werd geschoven. Met de opmerking; “Doet het kreng niet wat jij wil? Misschien dat deze hamer helpt. Als je er mee gaat gooien a.u.b. niet tegen mijn auto’s!”
De naam is blijven hangen de auto heeft deze sindsdien al verschillende keren waargemaakt! Overigens is “trut” wat te soft, denk meer aan “feeks” of de Engelse benaming “shrew” of “bitch”.
Post a Comment